This Heat Zone Wax Tool Heater will heat your wax tools by using electromagnetic induction, and not a flame.

The only way the unit will heat is if a metal tool is placed inside.  Sticking your finger in the induction will not turn on the unit.

You’ll notice a green light, which indicates the unit is ready to use. If it’s red or is flickering red and green, check the sensitivity adjustment on the side of the unit. Use a screwdriver to adjust.

Place your wax tool in the middle of the unit. The indicator light will alternate from green to red when the tool is heating. If the instrument is left in for longer than 15 seconds, the safety light will blink red.

Make sure you take advantage of the insert that will accumulate any wax residue. You can clean the insert and either discard or reuse the wax.