Hi I'm Kristi Broussard.  I want to introduce to you today this brand new kit.  It's an inside ring holder.  It was designed by a master stone setter. It looks a little complicated but it's really not.  It's a great tool. Okay what I'm going to do is set this on the side and I will show you piece by piece how to assemble it.  I'm going to show you the traditional one first. This fixture has an indentation right here.  You're going to use the wider hex screw.  Insert it in the bottom like that. This fixture goes on here like this. You have an allen wrench here for tightening it.  You're going to choose the correct little collet for whichever size the inside of your ring is and you're going to use one of these dies.  You're gonna, first of all this is notched so these little notches are going to fit in here like so.  This prevents it from from turning and slide this here.  And you have a little knob it goes right here.  Here we go.

So what happens here is when you tighten up on your knob it expands your collet.  And this is how you snug up your ring so it doesn't move and you'll take it and you'll fit it into your die ball we're a little mini die ball or the larger die ball or whichever fixture you choose to use and voila that's how we do it. Ok now we thought ahead and some people may not like the size of this knob.  So we have a smaller screw a little set screw that you can use in place of it.  Just take it and you put it in here and you'll use an allen wrench that's provided in the kit to tighten it the same way as the little knob.  Okay now that it's assembled there's no really need to unassemble it.  All you do is you could take it and just slide it into your box you need to use it again maybe a different size ring you just choose the appropriate die and the collet is the only thing you would need to change out.  We have another fixture here.  It's a hex shape.  This is amazing you going to really love it.  What we do here is we're going to use the longer set screw and its indented just like the first fixture.  Slide that in there and pick a die and one of these.  So just like the first fixture you have a little groove here. You'll stick the little notches in there, here. And you'll tighten it up with a little allen wrench which expands your collet, expands your little die.  This fixture you can use for setting the stones on the side of a ring or maybe a hard to reach angle.  You can just adjust the angle with this one.  This is a complete set you got two sets of dies.  It's a Stuller exclusive.  You will find this kit to be amazing, it's very very good kit. I highly recommend it and it will be in the January Bench pub.