Stuller Video Center

Retipping A Prong Using Redi-Prongs And Laser Welder

Watch as resident laser expert, John Vandergriff, shows how to retip a prong using redi-prongs and the laser welder.

Products in Retipping A Prong Using Redi-Prongs And Laser Welder Video

Previous Next

Video Transcript

I'll be doing these reseting with a ready prong.  When I do a retipping I like to make sure that there's no metal over the stone, have the angle coming off meet the angle coming off of the stone. Now for this one I have a ready prong and with a ready prong to use the side that has the highlight on. And so pick this up with adopting wax. This one is one without solder one specifically designed for laser welding.  Place it where I need it and weld it there. Good. It's over the stone very well.  Then I will continue to weld it together.  I have the parameter set 210 volts, five milliseconds, 0.4 millimeter want a smaller beam so it doesn't hit the stone and 0.2 hertz that way it doesn't shoot very fast and you can be very careful.  Now and there it is.
Couldn't find what you were looking for?
11/22/2024 Market Prices:
Gold 2694.95 Platinum 967.00 Silver 31.26