In this video I'm going to do a sizing up on a platinum band.  Good little platinum from Stuller.   And it's a sizing up so I'm going to do both sides now.  Just clipped off this little piece go and place it in here and all I did is just you know cut it with a saw blade.  And now normally with my parameters for platinum is about 246 volts, 4 milliseconds in 0.6 millimeter, but seeing as though this is going to be a sizing I'm going to up the voltage up to 300 because I want to do this and want to do it nice and fast and just want to show you all about how quickly it can be done.  So now let's get to it.  So I could just put it in there, zap it into place, tack it, looks good looks good looks good and go.  And because it's bit thicker I won't need to add any wire.  Just a little bit around the corners. Use that high power to get deeper in using platinum cobalt wire about 28 gauge it's going to build up the corners here.  We could do it you know it looks good.  Looks good looks good don't need to add a lot of wire for platinum.  There we go it's just ready to go to a little bit of filing and c'est bon.